Hypalon vs PVC: Why Tropical Waters Demand CSM Hypalon Collars
For RHIBs that work every day in Indonesia’s heat and sun, Hypalon is generally the stronger collar fabric. CSM Hypalon resists UV, heat and abrasion better than PVC, which is why Outborn Watercraft, a rigid inflatable boat builder in Bali, makes its collars from premium 1,300 g/m² Hypalon. PVC still has a place on lighter, occasional-use boats. Here is how to decide which suits your operation.
What Is CSM Hypalon?
CSM stands for chlorosulfonated polyethylene, a synthetic rubber long sold under the Hypalon name. Builders coat a woven fabric with it to make the inflatable tubes, or collars, that give a RHIB its buoyancy and stability. PVC, by contrast, is a plastic coating that is typically heat-welded at the seams.
What the Tropics Do to Inflatable Collars
A collar on a boat in Bali faces a tough combination every day:
- Intense UV that fades and weakens fabric over time
- Heat that stresses coatings and adhesives when the boat sits in the sun
- Humidity and salt water that work into seams and fittings
- Abrasion from jetties, yacht sides, and loading and unloading
For tender fleets, charter operators and hotel or villa guest transfers, a boat may be launched and recovered many times a week. At that pace, small weaknesses in a collar show up faster.
Hypalon vs PVC at a Glance
| Factor | Hypalon (CSM) | PVC |
| UV and heat resistance | Generally stronger in sustained tropical sun | Can suit lighter, occasional use |
| Abrasion resistance | Tough against jetty and tender-dock contact | Varies with fabric and coating |
| Seam construction | Glued seams | Heat-welded seams |
| Weight | Slightly heavier | Often lighter |
| Best suited to | Daily commercial and tender use | Occasional or lighter-duty use |
Neither fabric is right for every boat. The real question is how hard and how often your boat works.
How to Choose the Right Collar Fabric
- Count your running days. Daily commercial use favours Hypalon.
- Check where the boat sits. Boats left in open sun on a mooring or jetty see the most UV.
- Think about handling. Frequent docking, loading and tender duty mean more abrasion.
- Plan for the long term. Consider the working life you want from the collars, not just the first season.
- Ask the builder. The right fabric depends on your model, route and workload.
Not sure which fabric suits your tender or charter boat? Ask the Outborn team for a collar recommendation.
How Outborn Builds Collars for Tropical Waters
Outborn Watercraft uses premium 1,300 g/m² Hypalon fabric for the collars on its RHIBs, chosen for its durability, UV resistance and performance in demanding marine environments. Combined with fibre-reinforced composite hulls built in our Bali workshop, that gives you a boat designed for daily work.
Explore the 5m, 6m and 7m with aluminium T-top models, popular as tenders, or shape your own on the Full Custom page. Our earlier guide to the advantages of Hypalon over PVC (in Bahasa Indonesia) covers the material in more detail.
Simple Care Habits That Help Hypalon Last
- Rinse with fresh water after each trip
- Keep the boat shaded or covered when idle
- Use cleaners made for inflatable fabric
- Check pressure regularly, especially after temperature swings
- Book regular inspections. Outborn looks after Outborn boats at its Bali workshop, including tube replacement and general servicing
To see how fabric, storage and care add up, read our Ultimate Guide to RHIB Maintenance.
Ready to specify your next tender? Talk to Outborn Watercraft about the right model and collar for your operation, or visit our workshop in Pemogan, Denpasar Selatan, by appointment. Contact our Bali team.
Frequently Asked Questions
For daily work in strong tropical sun, Hypalon (CSM synthetic rubber) is generally the more durable choice, because it resists UV, heat and abrasion well. PVC can suit lighter or occasional use. The right choice depends on how often, and how hard, you run the boat.
CSM stands for chlorosulfonated polyethylene, a synthetic rubber long sold under the Hypalon name. Boat builders coat fabric with it to make inflatable collars that stand up to sunlight, salt water and fuel splashes.
Outborn uses premium 1,300 g/m² Hypalon fabric for the tubes (collars) on its RHIBs. It is chosen for its durability, UV resistance and performance in demanding marine environments.
Hypalon is tough, but it lasts longer with simple habits: rinse with fresh water after use, keep the boat covered or out of direct sun when idle, use cleaners made for inflatable fabric, and check pressure regularly.
Both fabrics can be repaired, but the method differs: Hypalon is glued, while PVC is typically heat-welded. Either way, repairs are best done by trained technicians using the right adhesives or equipment.
Collar material is chosen when the boat is built. If your Outborn RHIB needs new tubes, our re-tubing service replaces the collar with high-quality tubing. Contact the team to discuss options for your model.



